Steering column control levers
Multifunction switch (left of steering column)
When the ignition is turned on, the following switch positions are possible:
- 1 – moving the switch up turns on the right turn signals;
- 2 – moving the switch down turns on the right turn signals;
- 3 – moving the switch to the instrument panel constantly turns on the high beam headlights;
- 4 – moving the switch towards you briefly turns on the high beam headlights;
- 5 – rotary light switch.
Rotary light switch
When the ignition is turned on, the following switch positions are possible:
- 0 – all external lighting is off;
side lights are on;
headlights are on (high or low beam).
Windscreen wiper/washer switch (right of steering column)
When the ignition is turned on, the following switch positions are possible:
- 1 – single wiper activation;
- 2 – normal windshield wiper operation;
- 3 – accelerated windshield wiper mode;
- 4 – windshield wiper operation at intervals;
- 5 – rear window wiper operation (moving the switch to the instrument panel);
- 6 – operation of the rear window washer (further movement of the switch to the instrument panel);
- 7 – when the button is pressed, the windshield washer operates. If the exterior lighting is on, the headlight washers (if available) are turned on.