Side direction indicator
 |
 |
1 – lower holder; 2 – upper holder; 3 – lower bracket; 4 – latch
1. Remove the ground wire from the battery.
2. Remove the front turn signal bulb and the corresponding headlight.
3. Press the plastic fastening of the lower headlight adjustment screw, turn it counterclockwise and remove it into the engine compartment.
4. Disconnect the lower turn signal bracket.
5. Press the turn signal back, release the side latches and, using a screwdriver, move the fasteners to the side and remove the lower part of the turn signal forward (until the lower bracket comes out toward the bumper). Then tilt and remove the turn signal.
6. Installation is carried out in the reverse order of removal.
(The original can be found on the specified resource: FORDBOOK.RU)