Replacing indicator lamps (Fiesta 4)

The indicator lamps installed in the instrument cluster are soldered to the socket and can therefore only be replaced with the socket.



SEQUENCE OF WORKS



Fig. 15.35. Location of lamps (1) and clamps (2) for fastening the instrument cluster board



Fig. 15.36. Location of control lamps on the instrument cluster board

1. To remove the test lamp, turn the lamp holder 1/4 turn counterclockwise (Fig. 15.35, 15.36).

2. Lamps can only be replaced together with their sockets.

3. Remove the lamp from the holder.

4. Insert the new bulb into the holder by turning it clockwise. Do not bend the contact plates when installing.

The article was taken in its entirety from the specified website fordbook