Checking and cleaning the oil filler cap (every 10,000 km or 6 months) (Transit 2)

1. Remove and inspect the cap to ensure it is in good condition and not clogged with sediment.

2. Remove the inside of the cap and clean it, if necessary, with solvent or a jet of compressed air under low pressure. Replace the cap with a new one if it is heavily clogged with sediment and cannot be cleaned.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article reviewed: Afanasy Koshelev

« Previous articles
Changing engine oil and oil filter (every 10,000 km or 6 months)
Inspection and replacement of hoses in the engine compartment (every 10,000 km or 6 months)
Inspection and replacement of drive belts (every 10,000 km or 6 months)
Seat belt inspection (every 10,000 km or 6 months)
Checking, servicing and charging the battery (every 10,000 km or 6 months)

Next articles »
Draining sediment from the fuel filter (every 10,000 km or 6 months)
Check steering, suspension and wheels (every 10,000 km or 6 months)
Brake check (every 10,000 km or 6 months)
Checking the engine compartment wiring (every 20,000 km or 12 months)
Checking the air conditioning system (monthly/every 20,000 km or 12 months)

Link to this page in different formats

HTMLTextBB Code

Visitor comments

No comments yet