Contents: Removal ↳ Installation ↳
Removal
1. Open the hood and support it.
2. Unscrew the screws securing the radiator grille on both sides.
3. Disconnect the headlight washer hose (if it is installed) from the tee. Plug it to prevent the cleaning fluid from leaking, or tie it so that its end is above the liquid level in the tank, which will prevent leakage.
4. Pry the retainer covers free, then either rotate the plastic retainers a quarter turn to release them or remove the screws, depending on your mounting method. Remove the grille panel (see Figure 27.4).
Figure 27.4. Location of front grille fasteners (indicated by arrows).
Installation
5. Installation is carried out in the reverse order of removal. Insert the plastic clips (if provided), then, pressing them into place to secure them, close the lids.