Note: When performing this operation, it is important to prevent coolant and windshield washer fluid from getting on the hood of the car, so it is necessary to plug the radiator outlet pipe and the windshield washer hose.
1. Disconnect the negative cable from the battery.
2. Unscrew the coolant tank/windshield washer tank mounting bolt.
3. Lift the reservoir and remove the washer fluid pump electrical connector (see figure).
4. Disconnect the hose from the radiator filler neck and plug it to prevent coolant from leaking out.
5. Disconnect the washer hose.
Note: If there is fluid in the washer reservoir, it will start to leak when the hose is disconnected, so immediately place a piece of hose clamped tightly at one end onto the nozzle.
6. Remove the tank.
7. Install in the reverse order of disassembly.
The original can be found on this resource: FORDBOOK