SEQUENCE OF WORKS
1. Raise the front of the vehicle. Disconnect the negative battery cable (terminal "31") and the connector from the radiator fan motor. Remove the cable from the guides.
2. Remove the lower radiator grille.
Fig. 6.10. Location of the upper radiator fan shroud mount supports
3. Lift the fan slightly together with the supports and pull it out of the supports (Fig. 6.10). Then, moving it downwards, remove it from the engine compartment.
4. Unscrew the three nuts and remove the radiator fan from the casing.
5. Remove the fan impeller from the fan motor shaft. To maintain balance, first mark the position of the impeller on the motor shaft.
6. Install the new engine in the reverse order of removal.