Front suspension
| Front wheel alignment, mm | 0 ±1.0 - all models |
| steering knuckle angle | wheel tilt angle | |
| 1.1 with manual transmission | 0°23'...1°23' (-37') | 0°25...1°40' (-50') |
| 1.1 - Model S | 0°36'...1°36' (-24') | 0°22'...1°37' (-53') |
| 1.1 with STX, 1.4, 1.6, 1.8 D | 0°18...1°18' (-42') | 0°12'...1°27' (-1°3') |
| 1.1 with CTX, 1.4, 1.6, 1.8 D and S model | 0°32'...1°32' (-28') | 0°8'...1°23' (-1°7') |
| XR 2i | 0°45'...1°45' (-15') | 0°13'...1°28' (-1°2') |
| The greatest permissible change in angle after a full turn of the wheel from left to right | 1°0' | 1°15' |
The deviations that must be maintained during wheel installation are given in brackets.
Brake system
| Front disc brakes | ||
| Brake disc | without heat dissipation | with heat dissipation |
| Brake disc diameter, mm | 240 | 240 |
| Disc thickness, mm | 10,0 | 20,0 |
| Maximum disc thickness, mm | 8,0 | 18,0 |
| Maximum permissible lateral runout of the disc fixed to the hub, mm | ||
| Brake cylinder diameter, mm | 48,00 | 54,00 |
| Prev. wear of friction lining (without brake shoe plate), mm | 1,5 | 1,5 |
| Friction pad material type | Ferodo F 3432 F; Textar T 478 | |
| Rear drum brakes | all XR2 models, models with ABS, except XR2 and with ABS | XR2 | models with ABS |
| Drum diameter, mm | 180 | 203 | 203 |
| Width of pads and linings mm | 30 | 38 | 38 |
| Brake cylinder diameter, mm | 17,5 | 19,0 | 22,0 |
| Type of overlays | D-8212 | F 3601 | F 3601 |
| Thickness of new pads, mm | |||
| - a block located along the course | 6 | ||
| - a shoe located against the direction of travel | 4 | ||
| Limit wear of the lining, mm | 1,0 | ||
| Brake fluid | SAM-6C-9103 A (DOT 4) | ||
Steering
| Steering gear | serrated |
| Steering wheel torque, Nm | 1,05...1,70 |
| Number of steering wheel turns between extreme positions | 4,2 |