Checking and replacing the gearbox suspension (Taurus 1 and 2)

1. Remove the left front wheel and fender arch (chapter 11).

2. Insert a lever or a large screwdriver into the opening of the suspension and swing it up and down (see figure).



3. If the suspension is easily movable, or if the rubber is cracked, deformed or separated from the metal base, replace it with a new one.

4. Place a floor jack and a wooden block under the gearbox.

5. Unscrew the nuts from the box and the bolts securing it to the cross frame, remove the suspension (see picture). You may have to slightly lift the box with a jack to remove the suspension.



6. Installation is carried out in reverse order.